SCHEDULE
| Keyword | Status | Spelling | Note |
|---|---|---|---|
| ACTION | not-yet | — | OPM Flow manual 12.3.1 (page 1691) documents it; PetroScript has no statement for it and the importer does not read it |
| ACTIONG | not-yet | — | OPM Flow manual 12.3.2 (page 1692) documents it; PetroScript has no statement for it and the importer does not read it |
| ACTIONR | not-yet | — | OPM Flow manual 12.3.3 (page 1693) documents it; PetroScript has no statement for it and the importer does not read it |
| ACTIONS | not-yet | — | OPM Flow manual 12.3.4 (page 1694) documents it; PetroScript has no statement for it and the importer does not read it |
| ACTIONW | non-goal | — | OPM Flow does not implement the well-scoped action keyword and stops the run rather than ignore it (manual 12.3.5, printed page 1695: ‘not supported by OPM Flow but would change the results if supported so the simulation will be stopped’); measured rc=1 on BOTH pinned releases, rejected at load with ‘ACTIONW: keyword not supported’ and no summary or restart file written, on a flat deck and a nested one alike and with relaxed action parsing; state the conditions with ACTIONX, which both releases run on the same deck. The escalating threshold alone has no target: both releases also reject the manual’s two-parameter ACTIONX constant that would express it |
| ACTIONX | semantic | ps.actions.When | — |
| APILIM | not-yet | — | OPM Flow manual 12.3.9 (page 1713) documents it; PetroScript has no statement for it and the importer does not read it |
| AQUCWFAC | not-yet | — | OPM Flow manual 12.3.13 (page 1715) documents it; PetroScript has no statement for it and the importer does not read it |
| BCPROP | semantic | ps.grid.BoundaryCondition | — |
| BRANPROP | semantic | ps.groups.Branch | — |
| CALTRAC | not-yet | — | OPM Flow manual 12.3.20 (page 1727) documents it; PetroScript has no statement for it and the importer does not read it |
| CECON | non-goal | — | OPM Flow does not implement well-connection economic limits and stops the run rather than ignore them (manual 12.3.21, printed page 1728: ‘not supported by OPM Flow but would change the results if supported so the simulation will be stopped’); measured rc=1 on BOTH pinned releases, deck rejected at load with no timestep taken |
| CECONT | not-yet | — | OPM Flow manual 12.3.22 (page 1729) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPDAT | semantic | ps.Perforate | — |
| COMPDATL | not-yet | — | OPM Flow manual 12.3.25 (page 1735) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPDATM | not-yet | — | OPM Flow manual 12.3.26 (page 1739) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPFLSH | not-yet | — | OPM Flow manual 12.3.27 (page 1740) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPIMB | not-yet | — | OPM Flow manual 12.3.28 (page 1741) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPINJK | not-yet | — | OPM Flow manual 12.3.29 (page 1743) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPLMPL | not-yet | — | OPM Flow manual 12.3.30 (page 1744) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPLUMP | semantic | ps.wells.Lump | — |
| COMPOFF | not-yet | — | OPM Flow manual 12.3.32 (page 1749) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPORD | semantic | ps.Well | — |
| COMPRIV | not-yet | — | OPM Flow manual 12.3.34 (page 1752) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPRP | not-yet | — | OPM Flow manual 12.3.35 (page 1753) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPRPL | not-yet | — | OPM Flow manual 12.3.36 (page 1754) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPSEGL | not-yet | — | OPM Flow manual 12.3.37 (page 1755) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPSEGS | semantic | ps.wells.Segments | — |
| COMPTRAJ | semantic | ps.Well | — |
| COMPVE | not-yet | — | OPM Flow manual 12.3.40 (page 1765) documents it; PetroScript has no statement for it and the importer does not read it |
| COMPVEL | not-yet | — | OPM Flow manual 12.3.41 (page 1766) documents it; PetroScript has no statement for it and the importer does not read it |
| CPIFACT | not-yet | — | OPM Flow manual 12.3.42 (page 1767) documents it; PetroScript has no statement for it and the importer does not read it |
| CPIFACTL | not-yet | — | OPM Flow manual 12.3.43 (page 1768) documents it; PetroScript has no statement for it and the importer does not read it |
| CSKIN | semantic | ps.wells.Skin | — |
| DATES | semantic | ps.Schedule(report=[...]) | — |
| DCQDEFN | not-yet | — | OPM Flow manual 12.3.46 (page 1774) documents it; PetroScript has no statement for it and the importer does not read it |
| DELAYACT | not-yet | — | OPM Flow manual 12.3.48 (page 1776) documents it; PetroScript has no statement for it and the importer does not read it |
| DIMPES | not-yet | — | OPM Flow manual 12.3.50 (page 1778) documents it; PetroScript has no statement for it and the importer does not read it |
| DIMPLICT | not-yet | — | OPM Flow manual 12.3.51 (page 1779) documents it; PetroScript has no statement for it and the importer does not read it |
| DRILPRI | not-yet | — | OPM Flow manual 12.3.52 (page 1780) documents it; PetroScript has no statement for it and the importer does not read it |
| DRSDT | semantic | ps.pvt.DissolutionLimits | — |
| DRSDTCON | semantic | ps.storage.ConvectiveDissolution | — |
| DRSDTR | semantic | ps.pvt.DissolutionLimits | — |
| DRVDT | not-yet | — | OPM Flow manual 12.3.56 (page 1789) documents it; PetroScript has no statement for it and the importer does not read it |
| DRVDTR | not-yet | — | OPM Flow manual 12.3.57 (page 1790) documents it; PetroScript has no statement for it and the importer does not read it |
| DUMPCUPL | not-yet | — | OPM Flow manual 12.3.58 (page 1792) documents it; PetroScript has no statement for it and the importer does not read it |
| END | no-import-handler | — | — |
| ENDACTIO | semantic | ps.actions.When | — |
| EXCAVATE | not-yet | — | OPM Flow manual 12.3.70 (page 1796) documents it; PetroScript has no statement for it and the importer does not read it |
| EXIT | not-yet | — | OPM Flow manual 12.3.71 (page 1797) documents it; PetroScript has no statement for it and the importer does not read it |
| FBHPDEF | semantic | ps.wells.ControlDefaults | — |
| GASBEGIN | not-yet | — | OPM Flow manual 12.3.76 (page 1802) documents it; PetroScript has no statement for it and the importer does not read it |
| GASEND | not-yet | — | OPM Flow manual 12.3.77 (page 1803) documents it; PetroScript has no statement for it and the importer does not read it |
| GASFCOMP | not-yet | — | OPM Flow manual 12.3.78 (page 1804) documents it; PetroScript has no statement for it and the importer does not read it |
| GASFDECR | not-yet | — | OPM Flow manual 12.3.79 (page 1805) documents it; PetroScript has no statement for it and the importer does not read it |
| GASFDELC | not-yet | — | OPM Flow manual 12.3.80 (page 1806) documents it; PetroScript has no statement for it and the importer does not read it |
| GASFTARG | not-yet | — | OPM Flow manual 12.3.81 (page 1807) documents it; PetroScript has no statement for it and the importer does not read it |
| GASMONTH | not-yet | — | OPM Flow manual 12.3.82 (page 1808) documents it; PetroScript has no statement for it and the importer does not read it |
| GASPERIO | not-yet | — | OPM Flow manual 12.3.83 (page 1809) documents it; PetroScript has no statement for it and the importer does not read it |
| GASYEAR | not-yet | — | OPM Flow manual 12.3.84 (page 1810) documents it; PetroScript has no statement for it and the importer does not read it |
| GCALECON | not-yet | — | OPM Flow manual 12.3.85 (page 1811) documents it; PetroScript has no statement for it and the importer does not read it |
| GCONCAL | not-yet | — | OPM Flow manual 12.3.86 (page 1813) documents it; PetroScript has no statement for it and the importer does not read it |
| GCONENG | not-yet | — | OPM Flow manual 12.3.87 (page 1815) documents it; PetroScript has no statement for it and the importer does not read it |
| GCONINJE | semantic | ps.groups.InjectionTarget | — |
| GCONPRI | not-yet | — | OPM Flow manual 12.3.89 (page 1820) documents it; PetroScript has no statement for it and the importer does not read it |
| GCONPROD | semantic | ps.groups.ProductionTarget | — |
| GCONSALE | semantic | ps.groups.GasSales | — |
| GCONSUMP | semantic | ps.groups.FuelGas | — |
| GCONTOL | not-yet | — | OPM Flow manual 12.3.93 (page 1836) documents it; PetroScript has no statement for it and the importer does not read it |
| GCUTBACK | not-yet | — | OPM Flow manual 12.3.94 (page 1838) documents it; PetroScript has no statement for it and the importer does not read it |
| GCUTBACT | not-yet | — | OPM Flow manual 12.3.95 (page 1839) documents it; PetroScript has no statement for it and the importer does not read it |
| GDCQ | not-yet | — | OPM Flow manual 12.3.96 (page 1840) documents it; PetroScript has no statement for it and the importer does not read it |
| GDCQECON | not-yet | — | OPM Flow manual 12.3.97 (page 1841) documents it; PetroScript has no statement for it and the importer does not read it |
| GDRILPOT | not-yet | — | OPM Flow manual 12.3.98 (page 1843) documents it; PetroScript has no statement for it and the importer does not read it |
| GECON | semantic | ps.groups.Economics | — |
| GECONT | not-yet | — | OPM Flow manual 12.3.100 (page 1847) documents it; PetroScript has no statement for it and the importer does not read it |
| GEFAC | semantic | ps.groups.Efficiency | — |
| GLIFTLIM | non-goal | — | OPM Flow does not implement group artificial-lift constraints and stops the run rather than ignore them (manual 12.3.102, printed page 1852: ‘not supported by OPM Flow but would change the results if supported so the simulation will be stopped’); measured rc=1 on BOTH pinned releases, rejected at load with ‘GLIFTLIM: keyword not supported’ and no summary or restart file written |
| GLIFTOPT | semantic | ps.groups.GasLiftOptimization | — |
| GNETDP | not-yet | — | OPM Flow manual 12.3.104 (page 1856) documents it; PetroScript has no statement for it and the importer does not read it |
| GNETINJE | non-goal | — | OPM Flow does not implement the group injection network configuration and stops the run rather than ignore it (manual 12.3.105, printed page 1857: ‘not supported by OPM Flow but would change the results if supported so the simulation will be stopped’); measured rc=1 on BOTH pinned releases, rejected at load with ‘GNETINJE: keyword not supported’ and no summary or restart file written |
| GNETPUMP | not-yet | — | OPM Flow manual 12.3.106 (page 1858) documents it; PetroScript has no statement for it and the importer does not read it |
| GPMAINT | semantic | ps.groups.PressureMaintenance | — |
| GRADGRUP | not-yet | — | OPM Flow manual 12.3.108 (page 1863) documents it; PetroScript has no statement for it and the importer does not read it |
| GRADRESV | not-yet | — | OPM Flow manual 12.3.109 (page 1864) documents it; PetroScript has no statement for it and the importer does not read it |
| GRADRFT | not-yet | — | OPM Flow manual 12.3.110 (page 1865) documents it; PetroScript has no statement for it and the importer does not read it |
| GRADWELL | not-yet | — | OPM Flow manual 12.3.111 (page 1866) documents it; PetroScript has no statement for it and the importer does not read it |
| GRDREACH | not-yet | — | OPM Flow manual 12.3.112 (page 1867) documents it; PetroScript has no statement for it and the importer does not read it |
| GRUPMAST | non-goal | — | reservoir coupling (the GRUPMAST/GRUPSLAV/SLAVES family) runs several decks under a master run, which is a run topology the single-deck semantic surface does not have; OPM Flow does not implement GRUPMAST either, and ‘would change the results if supported so the simulation will be stopped’ (manual 12.3.113), which is what both supported versions do with it |
| GRUPNET | semantic | ps.groups.Node | — |
| GRUPRIG | not-yet | — | OPM Flow manual 12.3.115 (page 1873) documents it; PetroScript has no statement for it and the importer does not read it |
| GRUPSLAV | non-goal | — | reservoir coupling (the GRUPMAST/GRUPSLAV/SLAVES family) runs several decks under a master run, which is a run topology the single-deck semantic surface does not have; OPM Flow does not implement GRUPSLAV either, and ‘would change the results if supported so the simulation will be stopped’ (manual 12.3.116), which is what both supported versions do with it |
| GRUPTARG | not-yet | — | OPM Flow manual 12.3.117 (page 1875) documents it; PetroScript has no statement for it and the importer does not read it |
| GRUPTREE | semantic | ps.Group | — |
| GSATINJE | semantic | ps.groups.Satellite | — |
| GSATPROD | semantic | ps.groups.Satellite | — |
| GSEPCOND | not-yet | — | OPM Flow manual 12.3.121 (page 1887) documents it; PetroScript has no statement for it and the importer does not read it |
| GSSCPTST | not-yet | — | OPM Flow manual 12.3.122 (page 1888) documents it; PetroScript has no statement for it and the importer does not read it |
| GSWINGF | not-yet | — | OPM Flow manual 12.3.123 (page 1889) documents it; PetroScript has no statement for it and the importer does not read it |
| GTADD | not-yet | — | OPM Flow manual 12.3.124 (page 1890) documents it; PetroScript has no statement for it and the importer does not read it |
| GTMULT | not-yet | — | OPM Flow manual 12.3.125 (page 1891) documents it; PetroScript has no statement for it and the importer does not read it |
| GUIDECAL | not-yet | — | OPM Flow manual 12.3.126 (page 1892) documents it; PetroScript has no statement for it and the importer does not read it |
| GUIDERAT | semantic | ps.groups.GuideRates | — |
| GUPFREQ | not-yet | — | OPM Flow manual 12.3.128 (page 1898) documents it; PetroScript has no statement for it and the importer does not read it |
| GWRTWCV | not-yet | — | OPM Flow manual 12.3.129 (page 1899) documents it; PetroScript has no statement for it and the importer does not read it |
| HMWPIMLT | not-yet | — | OPM Flow manual 12.3.130 (page 1900) documents it; PetroScript has no statement for it and the importer does not read it |
| LGRFREE | not-yet | — | OPM Flow manual 12.3.132 (page 1902) documents it; PetroScript has no statement for it and the importer does not read it |
| LGRLOCK | not-yet | — | OPM Flow manual 12.3.133 (page 1903) documents it; PetroScript has no statement for it and the importer does not read it |
| LGROFF | not-yet | — | OPM Flow manual 12.3.134 (page 1904) documents it; PetroScript has no statement for it and the importer does not read it |
| LGRON | not-yet | — | OPM Flow manual 12.3.135 (page 1905) documents it; PetroScript has no statement for it and the importer does not read it |
| LIFTOPT | semantic | ps.groups.GasLiftOptimization | — |
| LINCOM | not-yet | — | OPM Flow manual 12.3.137 (page 1908) documents it; PetroScript has no statement for it and the importer does not read it |
| MATCORR | not-yet | — | OPM Flow manual 12.3.138 (page 1909) documents it; PetroScript has no statement for it and the importer does not read it |
| MESSOPTS | not-yet | — | OPM Flow manual 12.3.141 (page 1911) documents it; PetroScript has no statement for it and the importer does not read it |
| MULSGGD | not-yet | — | OPM Flow manual 12.3.142 (page 1912) documents it; PetroScript has no statement for it and the importer does not read it |
| MULSGGDV | not-yet | — | OPM Flow manual 12.3.143 (page 1913) documents it; PetroScript has no statement for it and the importer does not read it |
| MULTSIG | not-yet | — | OPM Flow manual 12.3.149 (page 1915) documents it; PetroScript has no statement for it and the importer does not read it |
| MULTSIGV | not-yet | — | OPM Flow manual 12.3.150 (page 1916) documents it; PetroScript has no statement for it and the importer does not read it |
| NCONSUMP | not-yet | — | OPM Flow manual 12.3.159 (page 1919) documents it; PetroScript has no statement for it and the importer does not read it |
| NEFAC | semantic | ps.groups.Node | — |
| NETBALAN | semantic | — | — |
| NETCOMPA | not-yet | — | OPM Flow manual 12.3.162 (page 1925) documents it; PetroScript has no statement for it and the importer does not read it |
| NEXT | semantic | — | — |
| NEXTSTEP | semantic | — | — |
| NEXTSTPL | not-yet | — | OPM Flow manual 12.3.165 (page 1930) documents it; PetroScript has no statement for it and the importer does not read it |
| NODEPROP | semantic | ps.groups.Node | — |
| NWATREM | not-yet | — | OPM Flow manual 12.3.173 (page 1936) documents it; PetroScript has no statement for it and the importer does not read it |
| PICOND | not-yet | — | OPM Flow manual 12.3.175 (page 1938) documents it; PetroScript has no statement for it and the importer does not read it |
| PIMULTAB | deferred | — | well-productivity index scaling by water cut is not inverted yet; only its PIMTDIMS allocation absorbs |
| PLYDHFLF | deferred | ps.polymer.ThermalDegradation | polymer thermal-degradation tables are not inverted yet; author them through the polymer package |
| PLYROCKM | not-yet | — | OPM Flow manual 12.3.180 (page 1942) documents it; PetroScript has no statement for it and the importer does not read it |
| PLYSHEAR | deferred | ps.polymer.Shear | polymer shear-response tables are not inverted yet; author them through the polymer package |
| PLYVISCS | deferred | ps.polymer.SaltSensitivity | polymer salinity/temperature viscosity sensitivities are not inverted yet; author them through the polymer package |
| PLYVISCT | deferred | ps.polymer.TemperatureSensitivity | polymer salinity/temperature viscosity sensitivities are not inverted yet; author them through the polymer package |
| PLYVSCST | deferred | ps.polymer.SaltTemperatureSensitivity | polymer salinity/temperature viscosity sensitivities are not inverted yet; author them through the polymer package |
| PRIORITY | not-yet | — | OPM Flow manual 12.3.187 (page 1945) documents it; PetroScript has no statement for it and the importer does not read it |
| PRORDER | not-yet | — | OPM Flow manual 12.3.188 (page 1947) documents it; PetroScript has no statement for it and the importer does not read it |
| PYACTION | semantic | ps.actions.PyAction | — |
| PYEND | non-goal | — | embedded scripting is a non-goal; no semantic surface exists |
| PYINPUT | non-goal | — | embedded scripting is a non-goal; no semantic surface exists |
| QDRILL | not-yet | — | OPM Flow manual 12.3.192 (page 1956) documents it; PetroScript has no statement for it and the importer does not read it |
| RCMASTS | not-yet | — | OPM Flow manual 12.3.194 (page 1958) documents it; PetroScript has no statement for it and the importer does not read it |
| REACHES | not-yet | — | OPM Flow manual 12.3.195 (page 1959) documents it; PetroScript has no statement for it and the importer does not read it |
| READDATA | not-yet | — | OPM Flow manual 12.3.196 (page 1960) documents it; PetroScript has no statement for it and the importer does not read it |
| RIVDEBUG | not-yet | — | OPM Flow manual 12.3.198 (page 1962) documents it; PetroScript has no statement for it and the importer does not read it |
| RIVRPROP | not-yet | — | OPM Flow manual 12.3.200 (page 1964) documents it; PetroScript has no statement for it and the importer does not read it |
| RIVSALT | not-yet | — | OPM Flow manual 12.3.201 (page 1965) documents it; PetroScript has no statement for it and the importer does not read it |
| RIVTRACE | not-yet | — | OPM Flow manual 12.3.202 (page 1966) documents it; PetroScript has no statement for it and the importer does not read it |
| RPTHMG | not-yet | — | OPM Flow manual 12.3.203 (page 1967) documents it; PetroScript has no statement for it and the importer does not read it |
| RPTHMW | not-yet | — | OPM Flow manual 12.3.204 (page 1968) documents it; PetroScript has no statement for it and the importer does not read it |
| RPTRST | semantic | ps.Output(restart=[...]) | — |
| RPTSCHED | semantic | ps.Output(print=[...]) | — |
| SCDATAB | not-yet | — | OPM Flow manual 12.3.210 (page 1979) documents it; PetroScript has no statement for it and the importer does not read it |
| SCDETAB | not-yet | — | OPM Flow manual 12.3.211 (page 1980) documents it; PetroScript has no statement for it and the importer does not read it |
| SCDPTAB | not-yet | — | OPM Flow manual 12.3.212 (page 1981) documents it; PetroScript has no statement for it and the importer does not read it |
| SCDPTRAC | not-yet | — | OPM Flow manual 12.3.213 (page 1982) documents it; PetroScript has no statement for it and the importer does not read it |
| SCHEDULE | no-import-handler | ps.aquifers.Flux | — |
| SEPVALS | not-yet | — | OPM Flow manual 12.3.215 (page 1984) documents it; PetroScript has no statement for it and the importer does not read it |
| SIMULATE | not-yet | — | OPM Flow manual 12.3.217 (page 1986) documents it; PetroScript has no statement for it and the importer does not read it |
| SKIPREST | semantic | ps.initial.Restart | — |
| SLAVES | non-goal | — | reservoir coupling (the GRUPMAST/GRUPSLAV/SLAVES family) runs several decks under a master run, which is a run topology the single-deck semantic surface does not have; OPM Flow does not implement SLAVES either, and ‘would change the results if supported so the simulation will be stopped’ (manual 12.3.222), which is what both supported versions do with it |
| SOURCE | semantic | ps.grid.SourceTerm | — |
| STORE | non-goal | — | OPM Flow does not implement the save-state request and stops the run rather than ignore it, answering the card with ‘Unknown keyword: STORE’; measured rc=1 on BOTH pinned releases against both corpus decks that state it (store/BASE_MSW_STORE-01 and store/BASE_STDW_STORE-01), rejected at load with no report step taken, while the same two decks run to completion with the card removed. The manual documents no STORE entry to map. Request a restart at that report time with a dated ps.Output (m.at(date, ps.Output(restart=[‘basic=2’]))) instead — and note that the corpus’s restart-FROM-a-save decks (store/RST_STORE_STEP1_MSW-01 and store/RST_STORE_STEP1_STDW-01) are refused elsewhere, by the RESTART record’s own SAVE-file items, and belong to the two-stage restart capability rather than here |
| SWINGFAC | not-yet | — | OPM Flow manual 12.3.226 (page 1993) documents it; PetroScript has no statement for it and the importer does not read it |
| TIGHTEN | not-yet | — | OPM Flow manual 12.3.227 (page 1994) documents it; PetroScript has no statement for it and the importer does not read it |
| TIGHTENP | not-yet | — | OPM Flow manual 12.3.228 (page 1995) documents it; PetroScript has no statement for it and the importer does not read it |
| TIME | not-yet | — | OPM Flow manual 12.3.229 (page 1996) documents it; PetroScript has no statement for it and the importer does not read it |
| TSTEP | semantic | ps.Every(...) | — |
| TUNING | semantic | ps.Numerics(...) | — |
| TUNINGDP | not-yet | — | OPM Flow manual 12.3.232 (page 2005) documents it; PetroScript has no statement for it and the importer does not read it |
| TUNINGH | not-yet | — | OPM Flow manual 12.3.233 (page 2007) documents it; PetroScript has no statement for it and the importer does not read it |
| TUNINGL | not-yet | — | OPM Flow manual 12.3.234 (page 2008) documents it; PetroScript has no statement for it and the importer does not read it |
| TUNINGS | not-yet | — | OPM Flow manual 12.3.235 (page 2013) documents it; PetroScript has no statement for it and the importer does not read it |
| UDQ | semantic | ps.actions.UserQuantity | — |
| UDT | semantic | ps.actions.UserTable | — |
| USECUPL | not-yet | — | OPM Flow manual 12.3.238 (page 2031) documents it; PetroScript has no statement for it and the importer does not read it |
| VELOCITY | no-import-handler | — | — |
| VFPCHK | not-yet | — | OPM Flow manual 12.3.240 (page 2033) documents it; PetroScript has no statement for it and the importer does not read it |
| VFPINJ | semantic | ps.lift.InjectionTable | — |
| VFPPROD | semantic | ps.lift.ProductionTable | — |
| VFPTABL | not-yet | — | OPM Flow manual 12.3.243 (page 2047) documents it; PetroScript has no statement for it and the importer does not read it |
| WAITBAL | not-yet | — | OPM Flow manual 12.3.244 (page 2048) documents it; PetroScript has no statement for it and the importer does not read it |
| WALKALIN | not-yet | — | OPM Flow manual 12.3.245 (page 2049) documents it; PetroScript has no statement for it and the importer does not read it |
| WALQCALC | not-yet | — | OPM Flow manual 12.3.246 (page 2050) documents it; PetroScript has no statement for it and the importer does not read it |
| WAPI | not-yet | — | OPM Flow manual 12.3.247 (page 2051) documents it; PetroScript has no statement for it and the importer does not read it |
| WBHGLR | not-yet | — | OPM Flow manual 12.3.249 (page 2053) documents it; PetroScript has no statement for it and the importer does not read it |
| WBOREVOL | not-yet | — | OPM Flow manual 12.3.250 (page 2054) documents it; PetroScript has no statement for it and the importer does not read it |
| WCALCVAL | not-yet | — | OPM Flow manual 12.3.251 (page 2055) documents it; PetroScript has no statement for it and the importer does not read it |
| WCONHIST | semantic | ps.History | — |
| WCONINJ | not-yet | — | OPM Flow manual 12.3.253 (page 2061) documents it; PetroScript has no statement for it and the importer does not read it |
| WCONINJE | semantic | ps.Inject | — |
| WCONINJH | semantic | ps.InjectionHistory | — |
| WCONINJP | not-yet | — | OPM Flow manual 12.3.256 (page 2070) documents it; PetroScript has no statement for it and the importer does not read it |
| WCONPROD | semantic | ps.Produce | — |
| WCUTBACK | not-yet | — | OPM Flow manual 12.3.258 (page 2078) documents it; PetroScript has no statement for it and the importer does not read it |
| WCUTBACT | not-yet | — | OPM Flow manual 12.3.259 (page 2079) documents it; PetroScript has no statement for it and the importer does not read it |
| WCYCLE | semantic | ps.wells.Cycling | — |
| WDFAC | semantic | ps.wells.NonDarcyFactor | — |
| WDFACCOR | semantic | ps.wells.DamageFactorCorrection | — |
| WDRILPRI | not-yet | — | OPM Flow manual 12.3.263 (page 2086) documents it; PetroScript has no statement for it and the importer does not read it |
| WDRILRES | not-yet | — | OPM Flow manual 12.3.264 (page 2087) documents it; PetroScript has no statement for it and the importer does not read it |
| WDRILTIM | not-yet | — | OPM Flow manual 12.3.265 (page 2088) documents it; PetroScript has no statement for it and the importer does not read it |
| WECON | semantic | ps.wells.Economics | — |
| WECONINJ | non-goal | — | OPM Flow does not implement injection-well economic limits and stops the run rather than ignore them (manual 12.3.267, printed page 2094: ‘not supported by OPM Flow but would change the results if supported so the simulation will be stopped’); measured rc=1 on BOTH pinned releases, no timestep taken |
| WECONT | not-yet | — | OPM Flow manual 12.3.268 (page 2096) documents it; PetroScript has no statement for it and the importer does not read it |
| WEFAC | semantic | ps.wells.Efficiency | — |
| WELCNTL | not-yet | — | OPM Flow manual 12.3.270 (page 2101) documents it; PetroScript has no statement for it and the importer does not read it |
| WELDEBUG | not-yet | — | OPM Flow manual 12.3.271 (page 2103) documents it; PetroScript has no statement for it and the importer does not read it |
| WELDRAW | not-yet | — | OPM Flow manual 12.3.272 (page 2104) documents it; PetroScript has no statement for it and the importer does not read it |
| WELEVNT | not-yet | — | OPM Flow manual 12.3.273 (page 2105) documents it; PetroScript has no statement for it and the importer does not read it |
| WELLSTRE | semantic | ps.pvt.Composition | — |
| WELMOVEL | not-yet | — | OPM Flow manual 12.3.275 (page 2108) documents it; PetroScript has no statement for it and the importer does not read it |
| WELOPEN | semantic | ps.Open, ps.Shut, ps.Stop | — |
| WELOPENL | not-yet | — | OPM Flow manual 12.3.277 (page 2113) documents it; PetroScript has no statement for it and the importer does not read it |
| WELPI | semantic | ps.wells.ProductivityIndex | — |
| WELPRI | not-yet | — | OPM Flow manual 12.3.279 (page 2118) documents it; PetroScript has no statement for it and the importer does not read it |
| WELSEGS | semantic | ps.wells.Segments | — |
| WELSOMIN | not-yet | — | OPM Flow manual 12.3.281 (page 2128) documents it; PetroScript has no statement for it and the importer does not read it |
| WELSPECL | not-yet | — | OPM Flow manual 12.3.282 (page 2129) documents it; PetroScript has no statement for it and the importer does not read it |
| WELSPECS | semantic | ps.Well, ps.wells.Regroup | — |
| WELTARG | semantic | ps.Adjust | — |
| WELTRAJ | semantic | ps.Well | — |
| WFOAM | semantic | ps.foam.Package | — |
| WFRICSEG | not-yet | — | OPM Flow manual 12.3.287 (page 2146) documents it; PetroScript has no statement for it and the importer does not read it |
| WFRICSGL | not-yet | — | OPM Flow manual 12.3.288 (page 2147) documents it; PetroScript has no statement for it and the importer does not read it |
| WFRICTN | not-yet | — | OPM Flow manual 12.3.289 (page 2148) documents it; PetroScript has no statement for it and the importer does not read it |
| WFRICTNL | not-yet | — | OPM Flow manual 12.3.290 (page 2149) documents it; PetroScript has no statement for it and the importer does not read it |
| WGASPROD | not-yet | — | OPM Flow manual 12.3.291 (page 2150) documents it; PetroScript has no statement for it and the importer does not read it |
| WGORPEN | not-yet | — | OPM Flow manual 12.3.292 (page 2151) documents it; PetroScript has no statement for it and the importer does not read it |
| WGRUPCON | semantic | ps.wells.GuideRate | — |
| WHEDREFD | not-yet | — | OPM Flow manual 12.3.294 (page 2154) documents it; PetroScript has no statement for it and the importer does not read it |
| WHISTCTL | semantic | ps.wells.HistoryControl | — |
| WHTEMP | not-yet | — | OPM Flow manual 12.3.296 (page 2157) documents it; PetroScript has no statement for it and the importer does not read it |
| WINJCLN | semantic | ps.wells.FilterCake | — |
| WINJDAM | semantic | ps.wells.InjectionDamage | — |
| WINJFCNC | semantic | ps.wells.InjectedStream | — |
| WINJGAS | semantic | ps.pvt.Composition | — |
| WINJMULT | semantic | ps.wells.InjectionMultiplier | — |
| WINJTEMP | semantic | ps.wells.InjectedStream | — |
| WLIFT | not-yet | — | OPM Flow manual 12.3.303 (page 2173) documents it; PetroScript has no statement for it and the importer does not read it |
| WLIFTOPT | semantic | ps.groups.GasLift | — |
| WLIMTOL | not-yet | — | OPM Flow manual 12.3.305 (page 2178) documents it; PetroScript has no statement for it and the importer does not read it |
| WLIST | semantic | ps.wells.WellList | — |
| WLISTARG | not-yet | — | OPM Flow manual 12.3.307 (page 2181) documents it; PetroScript has no statement for it and the importer does not read it |
| WLISTNAM | not-yet | — | OPM Flow manual 12.3.308 (page 2184) documents it; PetroScript has no statement for it and the importer does not read it |
| WMICP | semantic | ps.wells.InjectedStream | — |
| WNETCTRL | not-yet | — | OPM Flow manual 12.3.310 (page 2189) documents it; PetroScript has no statement for it and the importer does not read it |
| WNETDP | not-yet | — | OPM Flow manual 12.3.311 (page 2190) documents it; PetroScript has no statement for it and the importer does not read it |
| WORKLIM | not-yet | — | OPM Flow manual 12.3.312 (page 2191) documents it; PetroScript has no statement for it and the importer does not read it |
| WORKTHP | not-yet | — | OPM Flow manual 12.3.313 (page 2192) documents it; PetroScript has no statement for it and the importer does not read it |
| WPAVE | semantic | ps.wells.PressureAveraging | — |
| WPAVEDEP | deferred | ps.wells.PressureAveraging | a per-well reference depth for block-average pressure reporting is not inverted yet; the semantic surface states one (ps.wells.PressureAveraging) and only the inverse is missing |
| WPIMULT | semantic | ps.wells.ProductivityMultiplier | — |
| WPIMULTL | not-yet | — | OPM Flow manual 12.3.317 (page 2200) documents it; PetroScript has no statement for it and the importer does not read it |
| WPITAB | not-yet | — | OPM Flow manual 12.3.318 (page 2203) documents it; PetroScript has no statement for it and the importer does not read it |
| WPLUG | not-yet | — | OPM Flow manual 12.3.319 (page 2204) documents it; PetroScript has no statement for it and the importer does not read it |
| WPMITAB | semantic | ps.polymer.MolecularWeightTable | — |
| WPOLYMER | semantic | ps.wells.InjectedStream | — |
| WPOLYRED | not-yet | — | OPM Flow manual 12.3.322 (page 2210) documents it; PetroScript has no statement for it and the importer does not read it |
| WREGROUP | not-yet | — | OPM Flow manual 12.3.323 (page 2211) documents it; PetroScript has no statement for it and the importer does not read it |
| WRFT | not-yet | — | OPM Flow manual 12.3.324 (page 2212) documents it; PetroScript has no statement for it and the importer does not read it |
| WRFTPLT | semantic | ps.wells.Survey | — |
| WSALT | semantic | ps.brine.Package | — |
| WSCCLEAN | not-yet | — | OPM Flow manual 12.3.327 (page 2219) documents it; PetroScript has no statement for it and the importer does not read it |
| WSCCLENL | not-yet | — | OPM Flow manual 12.3.328 (page 2220) documents it; PetroScript has no statement for it and the importer does not read it |
| WSCTAB | not-yet | — | OPM Flow manual 12.3.329 (page 2221) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGAICD | semantic | ps.wells.AICD | — |
| WSEGDFIN | not-yet | — | OPM Flow manual 12.3.331 (page 2230) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGDFMD | not-yet | — | OPM Flow manual 12.3.332 (page 2231) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGDFPA | not-yet | — | OPM Flow manual 12.3.333 (page 2232) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGEXSS | not-yet | — | OPM Flow manual 12.3.334 (page 2233) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGFLIM | not-yet | — | OPM Flow manual 12.3.335 (page 2234) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGFMOD | not-yet | — | OPM Flow manual 12.3.336 (page 2235) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGINIT | not-yet | — | OPM Flow manual 12.3.337 (page 2236) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGITER | semantic | — | — |
| WSEGLABY | not-yet | — | OPM Flow manual 12.3.339 (page 2238) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGLINK | not-yet | — | OPM Flow manual 12.3.340 (page 2239) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGMULT | not-yet | — | OPM Flow manual 12.3.341 (page 2240) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGPROP | not-yet | — | OPM Flow manual 12.3.342 (page 2241) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGPULL | not-yet | — | OPM Flow manual 12.3.343 (page 2243) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGSEP | not-yet | — | OPM Flow manual 12.3.344 (page 2244) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGSICD | semantic | ps.wells.ICD | — |
| WSEGSOLV | not-yet | — | OPM Flow manual 12.3.346 (page 2252) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGTABL | not-yet | — | OPM Flow manual 12.3.347 (page 2253) documents it; PetroScript has no statement for it and the importer does not read it |
| WSEGVALV | semantic | ps.wells.Valve | — |
| WSKPTAB | semantic | ps.wells.InjectedStream | — |
| WSOLVENT | semantic | ps.solvent.Package | — |
| WSURFACT | deferred | — | surfactant activation is unsupported by current OPM Flow evidence; the surfactant surface fails closed at validation |
| WTADD | not-yet | — | OPM Flow manual 12.3.352 (page 2264) documents it; PetroScript has no statement for it and the importer does not read it |
| WTEMP | semantic | ps.wells.InjectedStream | — |
| WTEMPQ | not-yet | — | OPM Flow manual 12.3.354 (page 2266) documents it; PetroScript has no statement for it and the importer does not read it |
| WTEST | semantic | ps.wells.WellTest | — |
| WTHPMAX | not-yet | — | OPM Flow manual 12.3.356 (page 2269) documents it; PetroScript has no statement for it and the importer does not read it |
| WTMULT | semantic | ps.wells.TargetMultiplier | — |
| WTRACER | semantic | ps.wells.InjectedStream | — |
| WVFPDP | semantic | ps.Produce | — |
| WVFPEXP | semantic | ps.Produce | — |
| WWPAVE | deferred | ps.wells.PressureAveraging | per-well block-average pressure parameters are not inverted yet; the field-wide WPAVE card imports, and the same semantic policy carries a well selector, so the gap is the inverse and not the surface |
| ZIPP2OFF | not-yet | — | OPM Flow manual 12.3.362 (page 2283) documents it; PetroScript has no statement for it and the importer does not read it |
PetroScript is licensed under the Apache License 2.0. © 2026 Blauweiss EDV LLC. PetroScript by Blauweiss AI.For AI agents: llms.txt